Performance

Z32 NISMO Fuel Pressure Regulator

The adjustable pressure regulators replace the OE regulator and allow adjustment of the fuel pressure to 10Ka/L/h with a flow rate of 250m/sec » details

Z32 TT STILLEN Intercooler

Take a 300ZX turbo our on a hot summer day and drive around for a while to let it get good and hot. Then punch it. Compare that performance to the same car out on a cool night? This is the comparison that customers have made on the before and after installing our intercoolers upgrade. Intercoolers cool the fuel/air mixture allowing a denser charge to be inhaled into the cylinders with each intake cycle. STILLEN intercoolers offer increased surface area - 35% over stock, the largest available for the Z. » details

Z32 TT STILLEN Intercooler Ducts

These ducts increase the efficiency of your STILLEN intercoolers by increasing cooling air flow. More cooling equals a denser air fuel charge which in turn yields more horsepower. The perfect time to install this item is when you upgrade to STILLEN's GTZ-R or GTZ-R2 fascia. This item is designed specifically to fit the STILLEN upgraded intercoolers. It may not work with other brands or the stock units. These ducts will also fit stock bumper skins. » details

Z32 NISMO 555 Injectors

When increasing boost, or adding a nitrous system, the OE injectors no longer provide a suffiecient amount of fuel,where as the NISMO 555 injectors will provide what you need. Requires an ECU upgrade » details

Z32 TT JWT Sport 500 Turbos

» details

Z32 JWT POP Charger

POP-Charger air filters are designed for maximum air flow by using a 6" diameter venturi surrounded by an oiled gauze filter element. The filter element is reusable after cleaning and reapplying filter oil. Horsepower increases from 6-8 HP on non-turbos to 18-20 HP on the 300ZXTT are typical. POP-Charger aluminum venturis are made from lightweight cast aluminum and CNC machined by us to ensure a quality fit. » details

Z32 TT STILLEN Boost Hose Kit (BLUE)

As the car ages, or as you begin to venture above stock boost levels, it is time to change out the factory rubber boost hoses. STILLEN's 4-ply silicon boost hoses will not be affected by higher temperatures or boost. Kit includes four hoses and eight hose clamps. Hoses are preshaped for a great fit. » details

Z32 TT STILLEN Boost Hose Kit (RED)

Z32 NA STILLEN Headers

This is the single most significant power modification a non-turbo Z car can receive, short of nitrous. Throughout the RPM ranges, there is a noticeable increase in horsepower, with the greatest gains in the higher levels. Engine noise is not increased, and the car remains very driver-friendly despite the extra power. STILLEN headers are ceramic coated for a long life and optimum heat dissipation. » details